The wireless phase detector makes the dangerous and essential work of high voltage digital display phase checking safe and reliable. The pointer display is clear at a glance, and the weight is only 1 / 10-1 / 20 of the transformer, so it is convenient to carry. It is an indispensable tool for high voltage electricians.
1. Site operation must comply with the work requirements.
2. The instrument must be self checked before use, and the transmitter and receiver batteries of the wireless phase analyzer must be sufficient, otherwise the transmitter and receiver sensitivity will be affected.
3. In the process of use, it should not be greater than the effective receiving distance, and the transmitter should be placed in an open place as far as possible.
4. In the process of use, avoid the use of radio transmitter, so as to avoid interference and the receiver can not distinguish.
5. During the test, the tester should wear insulating shoes and be away from the safe distance. Meter measurement value of phase detector
1. Wireless high-voltage phase detector is used to check and verify the phase of high-voltage power lines under operating voltage. It is an on-line testing tool. Wireless phase detector specially conducts high-frequency withstand voltage test for phase bar directly contacting with high-voltage. The results show that the insulation performance and safety distance can meet the requirements of electrical safety regulations. In addition, due to the discharge indicator tube installed at the end of the nuclear phase bar, when the connection between the terminal of the nuclear phase bar and the phase meter is disconnected, the safety of personnel and equipment can also be ensured.