Scope: MHVTS-III high voltage test system can generate 200kV HVAC, 280kV HVDC and 400 kV lightning voltage and switching voltage. The system can carry the insulation withstand test for insulating materials and power equipment, it meets the requirements of IEC 60099-4 and relevant standards.
Main specifications are as follows
IMP stage | Single stage | Two stages | Three stages | |
Polarity | Positive and negative | |||
Discharge capacitance per stage/nF | ≥100 | ≥300 | ≥100 | ≥100 |
Max. total charging voltage/ kV | 140 | 140 | 280 | 420 |
Max. energy at max. charging voltage/ J | 980 | 2940 | 1960 | 2940 |
Max. output voltage LI no load/ kV | 130 | 130 | 265 | 400 |
Max. output voltage LI max. load/ kV | 125 | 110 | 255 | 380 |
Max. capacitive load for LI/ nF | ≥5 | ≥60 | ≥2.5 | ≥1.5 |
Max. output voltage SI no load/ kV | 125 | — | 255 | 380 |
Max. output voltage SI max. load/ kV 1 | 120 | — | 240 | 360 |
Max. capacitive load for SI/ nF | ≥4 | — | ≥2 | ≥1.5 |
Chopping gap voltage/kV(endure voltage) | ≥140 | ≥140 | ≥280 | ≥420 |
ADDRESS: No.1,Huoju Road, Beilin District, Xi'an,Shaanxi, China
TEL:86-(0)-82681326 86-(0)-83204290
E-mail: jddyjs@163.com